Tag: borates

Borates can be used to control a variety of wood destroying pests, and are actively used to control termites, control carpenter ants and control carpenter bees and control fungus. Bora-care and Timbor are the 2 most popular borate formulations used for home pest control. The character of borate products in general is to be toxic when ingested, and this is what the insects and fungi are doing when they bore in wood. The exception would be carpenter ants which, of course, do not eat the wood but merely excavate cavities and toss the wood chips away. However, they must get enough of the borate into their system by ingestion to have some effect.
Borates, and the related boric acid in general pest, are toxic ONLY by ingestion, and have no contact or desiccant properties whatsoever. Another benefit of the active ingredient is that it essentially lasts forever. Borates, which are found in Tim-bor and Bora-care are refined from borax, which is a mineral mined from the soil, and as a mineral it simply does not quickly degrade. Unless it is physically removed from the wood in some manner, borates will remain in place and active for a great many years, providing protection with just that first application.
Borates are highly soluble in water, so a powder formulation like Tim-Bor cannot be used where rainfall or irrigation will wash it off the treated wood, as the active ingredient does Pest Control Tech not penetrate beyond a fraction of an inch. Bora-Care, on the other hand, is formulated with solvents which, according to the manufacturer, cause it to be moved deep into the wood.
Here it not only is not exposed to rainfall, and thus can be used on some exterior woods, but it also takes the borate active ingredient into the feeding zone of the insects. The best you can hope for with borates that rest on the wood surface is to affect the adult insect as it bores out of the wood, such as beetles will do. With a borate that penetrates, like Training For Pest Control Operators Bora-care, you stand a good chance of killing the feeding larvae or termites that are eating through the wood well inside. There is no doubt that borates will kill any insect that eats them, or fungi that feed on treated wood, so if the material does penetrate then it definitely will be effective as a “post” treatment, or eradication of an existing infestation.
Ideally you can Pre-treat for termite control a home as it is being built, as it is during this construction that you have the best access to unfinished wood that will later be hidden, such as studs or floor joists. You can apply the liquid solution quickly and easily with little concern for finished surfaces. For Post-treatments you are only permitted to treat unfinished wood materials, so applying borates over paint or clear finishes is not feasible or effective. In what I would consider the normal definition of Post-treat …